- • 270Nm (200 ft lbs) Maximum Torque Capacity
- • Dog engagement via proven dog system
- • H pattern, 4 forward plus reverse
- • Input shaft to suit application is included
- • Various output flange options.
- • REM super finishing, 30% stronger gears!
- • Aluminum or magnesium case construction.
What’s in the box?
- • Complete with set ratios
- • Free diff (LSD option)
- • Input shaft
- • SMT 86/10 Manual
SMT 86/10 4-Speed H-Pattern Gearbox with Dog Gears!
A Transaxle four speed H-Pattern motorsports gearbox with various ratio options available to best suit your application. We recommend using this transmission within vehicles up to 270Nm (200 ft lbs) such as; formula cars such as formula ford, light weight circuit cars & historic race cars.
Ultra tough construction, gears are REM super finished to increasing life and reducing friction. Tests show core strength is approximately 30% greater than most manufactured gears.
Various output flange options: tripod, small (86mm), medium (100mm) & large (108mm) or bespoke available
Transmission can be mounted mid engine, rear wheel drive or rear engine, rear wheel drive.
|Dry Weight (approx)||Oil Capacity||Type of Oil|
|65 Lbs||1.7 Litres||75W-90|
Using a magnesium built maincase decreases the weight by around 10%.
HMT do not offer a warranty on gearboxes, However, in the unlikely event of a transmission failure & it deemed to be our parts at fault. We will then, of course, replace or remanufacture damaged components. If however, failure is due to customer error, the customer hot using the transmission in the correct manner or servicing is not undertaken on a necessary basis as directed by us, Then we will not take any responsibility for the failure of components or the transmission.
***Gearbox in Aluminum can be run with input above or below outputs, Magnesium versions have a single side plate so must be run with input below outputs.***
Vehicles up to 270Nm (200 ft lbs) such as; formula cars such as formula ford, light weight circuit cars & historic race cars.